Sony KLV-52X200A Flat Panel Television User Manual


 
42
GB
Picture flashes initially when
changing to HDMI mode or
switching on the TV with HDMI
mode.
This is probably caused by the authentication process between HDMI
equipment and the TV. It does not indicate a malfunction.
Sound
Problem Cause/Remedy
No sound, but good picture
Press 2 +/– or % (Mute).
Check that “Speaker” is set to “On” in the “Setup” menu (page 29).
Noisy sound
See “Picture noise” causes/remedies on page 41.
Channels
Problem Cause/Remedy
Some channels are blank
Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
Contact the broadcaster for transmission details.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode)
Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of
“On Timer” (page 28).
The TV turns on automatically
Check if the “On Timer” is activated (page 28).
Some input sources cannot be
selected
Select “Video Labels” in the “AV Setup” menu and cancel “Skip” of the
input source (page 30).
The remote does not function
Check that the remote is set correctly for the equipment you are using.
Check whether the equipment you want to use corresponds to the function
button being pressed (page 14).
If the remote does not operate the equipment even when the remote has been
set correctly to the equipment, enter the necessary code as explained in
“Programing the remote” (page 37).
Replace the batteries.
Problem Cause/Remedy