Sony KLV-V40A10E Flat Panel Television User Manual


 
38
GB
Specifications
Display Unit
(KLV-V32A10E)
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
32 inches
Approx. 80.0 cm measured diagonally
Display Resolution:
1,366 dots (horizontal) × 768 lines (vertical)
Power Consumption:
138 W
Standby Power Consumption:
0.5 W or less
Dimensions (w × h × d):
Approx. 808.0 × 588.5 × 308.2 mm (with stand)
Approx. 808.0 × 549.4 × 110.5 mm (without stand)
Mass:
Approx. 22.7 kg (with stand)
Approx. 18.7 kg (without stand)
(KLV-V40A10E)
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
40 inches
Approx. 101.5 cm measured diagonally
Display Resolution:
1,366 dots (horizontal) × 768 lines (vertical)
Power Consumption:
222 W
Standby Power Consumption:
0.5 W or less
Dimensions (w × h × d):
Approx. 1,014.4 × 722.7 × 370.3 mm (with stand)
Approx. 1,014.4 × 683.3 × 121.3 mm (without stand)
Mass:
Approx. 34.0 kg (with stand)
Approx. 27.5 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Depending on your country/region selection:
B/G/H, D/K, L, I
Colour System
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
VHF: E2–E12
UHF: E21–E69
CATV: S1–S20
HYPER: S21–S41
D/K: R1–R12, R21–R69
L: F2–F10, B–Q, F21–F69
I: UHF B21–B69
Terminals
/1
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video
output.
/2 (SMARTLINK)
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video
output, and SmartLink interface.
/3
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and audio/video output
which currently appears on the screen.
4
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
B/CB: 0.7 Vp-p, 75 ohms
P
R/CR: 0.7 Vp-p, 75 ohms
4 Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
HDMI IN 5
Video: 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits,
or analogue audio input (phono jacks)
6 S video input (4-pin mini DIN)
6 Video input (phono jack)
6 Audio input (phono jacks)
Audio output (Left/Right) (phono jacks)
i Headphones jack
Sound Output
10 W + 10 W
Supplied Accessories
Remote RM-EA001 (1)
Size AA batteries (R6 type) (2)
Coaxial cable (1)
Mains lead (Type C-6) (1)
Cable holder (1)
Support belt (1) and screws (2)
Optional Accessories
Wall-Mount Bracket SU-WL31 (for KLV-V32A10E),
SU-PW2 (for KLV-V40A10E)
TV stand SU-FF51
Design and specifications are subject to change
without notice.
Additional Information