Sony KLV-V40A10E Flat Panel Television User Manual


 
40
GB
Some tiny black points and/or
bright points on the screen
The picture of a display unit is composed of pixels. Tiny black points and/or
bright points (pixels) on the screen do not indicate a malfunction.
No colour on programmes
Select “Reset” in the “Picture Adjustment” menu to return to the factory
settings (page 22).
No colour or irregular colour
when viewing a signal from the
Y, PB/CB, PR/CR jacks of 4
Check the connection of the Y, PB/CB, PR/CR jacks of 4.
Make sure that the Y, PB/CB, PR/CR jacks of 4 are firmly seated in their
respective sockets.
Sound
Problem Cause/Remedy
No sound, but good picture
Press 2 +/– or % (Mute).
Check that “Speaker” is set to “On” in the “Features” menu (page 26).
Noisy sound
See the “Picture noise” causes/remedies on page 39.
Audio distortion
See “Audio Filter” on page 33.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode)
Check if the Sleep Timer function is activated (page 28).
Check if the Auto Shutoff is activated (page 28).
If no signal is received or no operation is performed in the TV mode for 10
minutes, the TV automatically switches to standby mode.
Some input sources cannot be
selected
Select “AV Preset” in the “Set Up” menu and cancel “Skip” of the input
source (page 31).
The remote does not function
Check that the remote is set correctly for the equipment you are using.
If the remote does not operate the equipment even when the remote has been
set correctly to the equipment, enter the necessary code set as explained in
“Programming the remote” (page 36).
Replace the batteries.
Wrong characters appear
when viewing the menu/Text/
NexTView
Select “Language” and “Country” in the “Set Up” menu and set the
language and country/region in which Text/NexTView is provided
(page 29). For Cyrillic languages, we recommended that you select Russia
if your own country/region does not appear in the list.
Problem Cause/Remedy