Filter
Top Products
11
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
First Time Operation - Basic Presetting
Automatically Tuning the TV using the Remote Control
You need to tune the set to receive channels (TV Broadcast). By following the instructions below, this projection TV
automatically searches and stores all available channels for you.
After having selected the language, a new menu appears automatically on the projection TV screen asking you to
automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house),
select the menu Auto Programme in the
(PRESET) menu and proceed in the same way as described below or, please
refer to the section "Automatically Tuning the TV" of this instruction manual.
1 Press the OK button on the remote control to select YES.
A new menu appears automatically on the screen asking you to
check that the antenna is connected.
2 Confirm that the antenna is connected and then press the OK
button.
The automatic tuning starts and the message "AUTO
PROGRAMME" flashes on the screen.
This procedure could take some minutes. Please, be patient and
do not press any button.
When the automatic tuning is finished, the Programme Sorting menu
appears on the screen.
Notes: • To stop the automatic tuning, press the MENU button.
• If you stop the automatic tuning by pressing the MENU
button, the Programme Sorting menu does not appear
automatically on the screen.
First Time Operation - Basic Presetting
Please confirm that
antenna is connected
Confirm: OK
PROG
1
AUTO PROGRAMME
AUTO PROGRAMME
SYS
B/G
CHAN
C 26
LABEL
- - - - -
PROG SYS CHAN LABEL
PROGRAMME SORTING
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
BBC-W
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
C 28
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
Select PROG: + OK
Exit: MENU
Do you want to start
automatic tuning?
Yes
No
Confirm: OK