Filter
Top Products
Getting Started
14
Manual Fine-Tuning
Normally, the automatic fine-tuning (AFT) is already working. However,
if the picture of a program is distorted, you can use the manual fine-tuning
function to obtain better picture reception.
1 Press MENU to display the main menu.
2 Move the cursor (z) to “PROGRAM PRESET” with + or – and press
ENTER.
The PROGRAM PRESET menu appears.
3 Move the cursor to “MANUAL PROGRAM” with + or – and press
ENTER.
The MANUAL PROGRAM menu appears.
4 Using + or – , move the cursor to the program position corresponding
to the channel which you want to manually fine-tune, and press ENTER
repeatedly until the AFT position turns red.
5 Fine-tune the channel with + or –
so that you get the best TV
reception.
As you press these buttons, the frequency changes from –15 to +15.
6 After fine-tuning, press ENTER.
The cursor appears beside the next program position. Now the fine-tuned
level is stored.
7 Repeat steps 4 to 6 to fine-tune other channels.
8 Press MENU to go back to the original screen.
To reactivate automatic fine
tuning (AFT)
Repeat from the beginning and
select “ON” in step 5.
CLEARON/OFF
ON SCREEN
INPUT
SELECT
DISPLAY
POWER
EJECT
MUTING
MENU
ENTER
2 31
5 64
8 97
0 C
-/--
+
--
+
--
PROGR
+
--
VOL
PICTURE
MODE
ON TIMER
SLEEP
INDEX
TRACKING
REC
AUTO/
MANUAL
COUNTER
RESET
PAUSE SEARCH
PLAY
STOP
REW
FF
TIMER REC
MANUAL PROGRAM
PRG SYS CH LABEL AFT
1
2
3
4
5
6
B/G
B/G
B/G
B/G
B/G
B/G
ON
ON
ON
ON
ON
ON
C04
C05
C09
C12
C21
C25
Select and press
ENTER
MANUAL PROGRAM
PRG SYS CH LABEL AFT
1
2
3
4
5
6
B/G
B/G
B/G
B/G
B/G
B/G
ON
ON
ON
ON
ON
C04
C05
C09
C12
C21
C25
Select and press
3
ENTER