Filter
Top Products
EN
27
Basic Operations
10 When you want to set other programs, press – to move down the cursor
to the next column, then repeat steps 2 to 9.
11 Press TIMER REC ON/OFF.
The TIMER REC lamp on the front of the video TV lights up and the video
TV enters timer recording standby mode.
Press TIMER ON SCREEN to erase the PROGRAM LIST.
Turn off the video TV if you do not want to watch the TV.
The video TV starts recording at the preset start time.
Daily/weekly recording
You can preset your video TV to record the same program every day of
the week (daily recording) or the same program on the same day every
week (weekly recording). Press – in step 3 until the desired setting
appears in the “DATE” position. With each press, the setting changes as
follows:
24 (today) n MON–SUN n MON–SAT n MON–FRI n EVERY SAT n
EVERY FRI n EVERY THU n EVERY WED n EVERY TUE n EVERY
MON n EVERY SUN n 23 (next month) n 22......
To stop timer recording
Press TIMER REC ON/OFF.
Using the Video TV before Timer
Recording Starts
You can watch a TV program, check the timer settings and reset the
counter in timer recording standby mode. However, press TIMER REC
ON/OFF to turn off the TIMER REC lamp on the front of the video TV to
do the following operations:
• ejecting the cassette
• using the tape operation buttons
• changing or canceling the timer settings
Remember to press TIMER REC ON/OFF again to make the TIMER REC
lamp light after the above operations.
CLEARON/OFF
ON SCREEN
INPUT
SELECT
DISPLAY
POWER
EJECT
MUTING
MENU
ENTER
2 31
5 64
8 97
0 C
-/--
+
--
+
--
PROGR
+
--
VOL
PICTURE
MODE
ON TIMER
SLEEP
INDEX
TRACKING
REC
AUTO/
MANUAL
COUNTER
RESET
PAUSE SEARCH
PLAY
STOP
REW
FF
TIMER REC