Filter
Top Products
12
SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal
Release the mains power cable from its securing posts.
Remove the rear cover fixing screws indicated. Pull the rear
cover away from the front beznet. Take care when removing
the rear cover not to damage the speaker cables as speakers
are fitted inside the rear cover.
2-2. Speaker Connector Disconnection
Before completely removing the rear cover disconnect the
speaker connectors which are located on the inside base of
thebeznet.
2-3. Speaker Box Removal
To remove the speaker boxpull forward in the direction of
the arrows while holding the rear cover. Ensure the weight is
supported as the box is pulled from its mountings.
To gain access to the speaker remove the six screws and pull
thetwo halves of the speaker box apart.
2-4. Speaker Box Disassembly
Screws
3 Screws at rear of
Speaker Box
=>
=>
=>
=>
<=
<=
=>
=>
=>