Filter
Top Products
33
4-3. TEST MODE 2:
00
Switch back to normal mode - ‘TT’ mode off
01
Set picture maximum
02
Set picture minimum
03
Set speaker/headphone Volume to 30%
04
Set speaker/headphone Volume to 50%
05
Set speaker/headphone Volume to 65%
06
Set speaker/headphone Volume to 80%
07
Ageing Mode
08
Shipping Condition
09
Language Reset
10
No function
11
Sub picture adjustment
12
Sub colour adjustment
13
Display software version and TV set configuration
14
Production Info Display
15
Picture Rotation
16
Picture level 50%
17
Audio mute on
18
No function
19
Sub brightness adjustment
20
See ‘TT10’
21
Destination A includes text setting display TV status
22
Destination L includes text settings, displ y TV status
23
Destination E includes text se tings, display TV status
24
Destination U includes text sett gs, display TV status
25
Destination D includ s text ettings, display TV status
26
Destination B includes text settings, display TV status
27
Destination K cludes text settings, display TV status
28
Destination R includes text settings, display TV status
30
See ‘TT10’
31
Geometry Adjustment 1
32
Geometry Adjustment 2
33
Error monitor
34
No function
35
CRT 4:3 < > 16:9 ; Display TV status
36
Line 23 detection switch
37
Velocity Modulation (VM) test
38
No function
39
No function
40
See ‘TT10’
41
Screen mode check
42
Re initialise geometry
43
No function
44
No function
45
No function
46
Reserved for deale commander
47
Re initialise NVM
48
Set NVM as non virgin
49
Set NVM as v gin
50
See ‘TT10’
51
Set Do b volume to 90%
2
Dolby on left speaker only
3
Dolby on right speaker only
54
Dolby on left centre only
55
Dolby on surround speaker only
56
-
59
No function
60
See ‘TT10’
61
Service mode
62
Production mode
65
Reset error codes
68
Ignore errors on
69
Ignore errors off
70
See ‘TT10’
71
-
72
No function
73
Clear programs
74
-
79
No function
80
See ‘TT10’
81
PAP H adjustment left image
82
PAP H adjustment right image
83
-
86
No function
87
Personal ID reset
88
Parental Lock off
89
No function
90
See ‘TT10’
Is available by pressing ‘TEST’ button twice, OSD ‘TT’ appears. The functions described below are available by pressing the two numbers. To
release the Test mode 2, press 0, 10, 20 ... twice or switch the TV set into Stand-by Mode. Pressing the two Local Control buttons ( + and - ) during
Power ON will also switch into ‘TT’ mode.
In ‘TT’ mode, it is possible to remove the Menu from the screen by pressing the Speaker Off button once. Pressing the Speaker OFF button a
second time will cause the menu to reappear. The Function is kept even when the menu is not displayed !!.
www.ELEKO.de