Sony KV-36XBR800, KV-40XBR800 CRT Television User Manual


 
33
SETUP Setup SETUPSETUP SETUPSETUP
Notes on Using This Connection
To Do This ... Do This ...
Watch the DVD player Press TV/VIDEO repeatedly to select the DVD input (VIDEO 5 in the
illustration).
Set up the TV remote control
to operate the DVD player
If you have a non-Sony DVD player, you must program the remote control.
See Programming the Remote Control on pages 43-44.
Activate the TV remote
control to operate the DVD
player
Open the outside cover, as shown on page 42. Then set the A/V slide switch
to the position you programmed for the DVD player.
Control DVD functions with
the TV remote control
See Operating a DVD Player on page 61.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 74-75.
You cannot record the signal from any equipment connected into the Y, PB,
P
R jacks.
36_40XBR.book Page 33 Tuesday, April 16, 2002 4:16 PM