Filter
Top Products
73
SETUP SETUP SETUPSETUP MenusSETUP
Using the Timer Menu
To select the Timer Menu
1 Press MENU.
2 Move the joystick B or b to
highlight the Timer icon and
press .
To reset the Clock or Timers
❑
Press RESET on the remote
control, when in the Timer
Menu, to reset to the factory defaults.
Selecting Timer
Options
3 The Timer Menu includes the following options:
Timer 1: Off
Timer 2: Off
Current Time
Select:
+
End: MENU
Move: V v B b
Option Description
Timer 1
Timer 2
You can use the Timers to program the TV to turn on and
off and tune to a specific channel at two scheduled
viewing times.
Timer 1 and Timer 2 are not available to be set until you set
the Current Time.
1 Move the joystick V or v to highlight Timer 1 or
Timer 2. To set the timer, move the joystick b.
2 Move the joystick V or v to highlight one of the
following options, then press .
Program Select to set the Timer by day, time,
duration, and channel.
Off Select to turn off the Timer. (Your previous
settings are saved.)
3 If you selected Program in step 2, move the joystick V
and v to set the day(s), hour, minute, duration, and
channel number. Press (or move the joystick b) to
confirm each setting and move to the next setting.
Move the joystick B to go back to the previous
setting.
4 Press MENU to exit the Menu. An LED on the front
panel will light, indicating the timer has been set.
Current Time
1 Press to select Current Time.
2 Move the joystick V and v to set the current time
(day, hour, and minute). Press (or move the
joystick b) to confirm each setting and move to the
next setting. Move the joystick B to go back to the
previous setting.
3 Press MENU to exit the Menu.
To go directly to
programming Timer 1 or 2 ,
press instead of moving
the joystick b.
z
To return to the Timer
Menu after programming one
of the Timers, press when
the highlight is in the channel
number field.
z
36_40XBR.book Page 73 Tuesday, April 16, 2002 4:16 PM