Filter
Top Products
13
SETUP Setup SETUPSETUP SETUPSETUP
Item Description
1 S VIDEO
VIDEO 2 INPUT
Connects to the S VIDEO OUT jack on your camcorder or other video
equipment that has S VIDEO. Provides better picture quality than composite
video (2).
2 VIDEO/L(MONO)-AUDIO-R
VIDEO 2 INPUT
Connects to the composite A/V output jacks on your camcorder or other
video equipment.
3 MENU Press to display the Menu. Press again to exit from the Menu. For details, see
“Using the Menus” on page 77.
4
Vv B b Press Vv B b to move the TV’s on-screen cursor.
5
Press to select an item in the TV’s menu.
6 Press to display the Memory Stick Menu. For details, see “Using the Memory
Stick Viewer” on page 61.
7 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s
video inputs.
8 -VOLUME + Press to adjust the volume.
9 -CHANNEL+ Press to scan through channels. To scan quickly through channels, press and
hold down either CHANNEL button.
0 Memory Stick insertion slot. For details, see “Inserting and Removing a
Memory Stick” on page 63.
qa Memory Stick LED When lit, indicates that the Memory Stick is being read. (Do not remove the
Memory Stick when the indicator is lit.)
qs TIMER LED When lit, indicates one of the timers is set. When the timer is set, this LED
will remain lit even if the TV is turned off. For details, see page 91.
qd STAND BY LED Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously, this may indicate the TV needs service (see
“Contacting Sony” on page 95).
qf Infrared Receiver (IR) Receives IR signals from the TV’s remote control.
qg POWER Press to turn on and off the TV.
34XBR.book Page 13 Monday, May 19, 2003 8:44 AM