Filter
Top Products
– 6 –
KV-J14P2S/J51PF2S
RM-869
Getting Started
6
-EN
Presetting channels
Presetting channels automatically
1
Press SELECT on the remote commander or
the TV until “AUTO PROGRAM” appears on
the screen.
2
Press +/– on the remote commander or
. +/– on the TV.
3
Press +/– on the remote commander or
. +/– on the TV again.
To start presetting channels automatically
from a specified program position
Press PROGR +/– or number buttons on the remote
commander or PROGR +/– on the TV until the
required program position appears on the screen after
step 2 of “Presetting channels automatically”.
1 2 3 1
SELECT
— PROGR +
You can preset up to 100 TV channels in numerical
sequence from program position 1 using the buttons on
the remote commander or the TV.
You can preset TV channels quickly, automatically or
manually.
Quick channel presetting
1
Press U to turn on the TV.
When the TV is turned on in standby mode, press
u
on the remote commander.
2
Press SELECT and PROGR + on the TV
simultaneously for one to two seconds.
—
PROGR
+
SELECT
U
u
…
—
.
+
Remote commander
Front of TV
Number
PROGR +/–
SELECT
+/–
U
or
1 2 3
1
—
.
+
or
SELECT SELECT
AUTO PROGRAM
VHF LOW B/G
1
— . +
or
or
1
2
3
4
6
7
8
9
÷
0
5
PROGR
— PROGR +
or
7
Getting Started
-EN
Disabling program positions
1
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the unused or unwanted program
position appears on the screen.
2
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM” appears
on the screen.
3
Press +/– on the remote commander or
. +/– on the TV.
4
Press PIC MODE on the remote commander.
5
Press SELECT on the remote commander or
the TV.
To preset the disabled program position again
Preset the channel quickly, automatically or manually.
Presetting channels manually
1
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM” appears
on the screen.
2
Press +/– on the remote commander or
. +/– on the TV.
3
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the required program position
appears on the screen.
4
Press +/– on the remote commander or
.
+/– on the TV until the required channel
picture appears on the screen.
5
Press SELECT on the remote commander or
the TV.
1
SELECT
SELECT
or
VHF LOW B/G
—
.
+
or
or
1
2
3
4
6
7
8
9
÷
0
5
PROGR
— PROGR +
or
or
SELECT
MANUAL PROGRAM
SELECT
or
—
.
+