Sony KV-TF21M61 CRT Television User Manual


 
– 65 –
KV-PF21M70/TF21M61/TF21M90/TF21P11
RM-952
5-4. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS
Note:
All capacitors are in µF unless otherwise noted.
All electrolytic capacitors are rated at 50V unless otherwise noted.
All resistors are in ohms.
k = 1000, M = 1000k
Indication of resistance which does not have rating electrical
power is as follows.
Pitch: 5 mm
Rating electrical power 1/4W (CHIP: 1/10W)
: nonflammable resistor.
¢ : internal component.
: panel designation or adjustment for repair.
All variable and adjustable resistors have characteristic curve B
unless otherwise noted.
Readings are taken with a color-bar signal input.
no mark : PAL
( ) : SECAM
[ ] : NTSC 3.58
« » : NTSC 4.43
Readings are taken with a 10 M
digital multimeter.
Voltage are dc with respect to ground unless other-
wise noted.
Voltage variations may be noted due to normal pro-
duction tolerances.
All voltages are in V.
:Cannot be measured.
Circled numbers are waveform references.
:B + bus.
:B – bus.
:signal path.
Reference information
RESISTOR : RN METAL FILM
: RC SOLID
: FPRD NONFLAMMABLE CARBON
: FUSE NONFLAMMABLE FUSIBLE
: RS NONFLAMMABLE METAL OXIDE
: RB NONFLAMMABLE CEMENT
: RW NONFLAMMABLE WIREWOUND
: * ADJUSTMENT RESISTOR
COIL : LF-8L MICRO INDUCTOR
CAPACITOR : TA TANTALUM
: PS STYROL
: PP POLYPROPYLENE
: PT MYLAR
: MPS METALIZED POLYESTER
: MPP METALIZED POLYPROPYLENE
: ALB BIPOLAR
: ALT HIGH TEMPERATURE
: ALR HIGH RIPPLE
Note: The component identified by shading and
mark
!!
!!
!
are critical for safety. Replace only
with part number specified.
*