Filter
Top Products
33Additional Information
Good m
orning!
Possible causeSymptom
Solutions
4
–
15
17
4
–
–
–
25
29
30
–
–
Stereo broadcast
sound switches
on and off or
is distorted.
or
The sound switches
between monaural
and stereo
frequently.
(KV-XA29M61/
XA25M61 only)
“100” appears on
the top of the screen
and no Teletext
display.
(KV-XA29M61/
XA25M61 only)
Teletext display is
incomplete (picture
snowy or double
images).
(KV-XA29M61/
XA25M61 only)
Picture slant
Lines moving across
the TV screen.
The 1 indicator on
your TV flashes red
a number of times
between 3-second
intervals.
TV cabinet creaks.
A “boom” sound is
heard when the
TV is turned on.
• Connection is loose or
the cable is damaged.
• The antenna direction
is inappropriate.
• Broadcast signal has a
transmission problem.
• The channel carries no
Teletext broadcast.
• Connection is loose or
the cable is damaged.
• The antenna direction
is inappropriate.
• Signal transmission is
too low.
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• There is interference
from external sources,
e.g., heavy
machineries, nearby
broadcast station.
• Your TV may need
service.
• Changes in room
temperature
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.
• The TV’s demagnetizing
function is working.
This does not indicate
a malfunction.
• Check the antenna cable and connection
on the TV, VCR and on the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Press A/B until a good sound is
heard.
––
• Check the antenna cable and connection
on the TV, VCR and on the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Try using a booster.
• Keep external speakers or other electrical
equipment away from the TV.
• Display the “SETUP” menu and adjust
“PIC ROTATION” until the picture
position is optimal.
• Use the fine tuning (“FINE”) function.
• Contact your nearest Sony service center.
—
—
Page