Filter
Top Products
5
Using Your New TV
Using Your New TV
Notes
• If you connect a monaural VCR, connect the yellow plug to (the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• If both (S video input) and t 1 (video input) at the rear of your TV
are input at the same time, the (S video input) is automatically
selected. To view the video input to t 1 (video input), disconnect the
S video cable.
• Do not connect video equipment to the t 3 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tips
• If you want to stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 28).
Note (KV-XA29M50/XA25M50 only)
• During automatic channel presetting, your TV screen will indicate “B/G”,
“I”, ”D/K” or “M” for the TV system (“TV SYS”).
Front of TV
PROGRMENU
AUTO
PROGR
ENTERSELECT
L(MONO)
3
1
2