Filter
Top Products
Getting Started
17
Hookups
filename[010get.fm] model name1[SLV-N81] model name2[SLV-N71]
[3-065-551-11 (1)]
You have now completed hookup.
Automatic clock setting
Once you’ve set up the VCR, it automatically sets the clock the first time you turn off
the VCR. “ACS” (Auto Clock Set) will flash in the display window and search for a
time signal provided by some TV channels. After that, whenever you turn off the
VCR, it checks the time and adjusts the clock, even for Daylight Saving Time.
If you want touse the timer to record right away, orif the channels inyour area do not
carry time signals, set the clock manually. For details, see page 33.
Notes
• If the clock is not set, “ACS” will flash in the display window whenever the VCR is turned
off. During this time, the VCR will searchfor a time signal.
• To successfully record a program from the digital satellite receiver, proceed as follows:
– Leave the digital satellite receiver on allthe time.
– Turn off the display (menu screen, channel number, etc.) of the digital satellite receiver.
– To record or receive locked channels, unlock the channel before the VCR starts recording.
– To set pay-per-view programs in the timer setting, order the pay-per-view program before
the VCR startsrecording.
– Some programs are copy protected. You cannot record these programs.
4The CABLEBOX CONTROL menuappears.
Select ON. For details, see page 36.
5Enter your digital satellite receiver code
number and press OK. For details, see page
36.
6Set your digital satellitereceiver output channel (BOXOUTPUT CH)to LINE
and press OK.
NEXT :
SELECT :
OK
SET UP
CABLE BOX CONTROL
EASY SET UPCANCEL :
CABLE MOUSE
BOX CODE NO.
BOX OUTPUT CH
OFF
ON
NEXT :
USE :
OK
0–9
SET UP
CABLE BOX CONTROL
EASY SET UPCANCEL :
CABLE MOUSE
BOX CODE NO.
BOX OUTPUT CH
ON
CH3
–––
SET UP
SET UP IS DONE
NEXT :
SELECT :
OK
SET UP
CABLE BOX CONTROL
EASY SET UPCANCEL :
CABLE MOUSE
BOX CODE NO.
BOX OUTPUT CH
ON
CH2
LINE
CH4
CH3