Filter
Top Products
74
Setting the timer manually
filename[010BAS.FM] model name1[SLV-N81] model name2[SLV-N71]
[3-065-551-11 (1)]
To stop recording
To stop the VCR while recording, press x STOP.
2
Press M/m to highlight the line that is to be set, then press OK.
3
Set the date, start and stop time, channel
number, and tape speed:
1 Press M/m to set each item.
2 Press , to highlight and set each item
in turn.
To correct a setting, press < to return to
that setting and reset.
When you set the channel number, the station ID may appear in the “CH”
position. You can set it while checking the station ID (SLV-N81 only).
To record the sameprogrameveryday or thesameday every week, press m
while the date is highlighted. For details, see “Daily/weekly recording” on
page 75.
To record from a source connected to the LINE-1 IN or LINE-2 IN jacks,
press INPUT SELECT or CH +/– to display “L1” or “L2” in the “CH”
position.
4
Press OK to confirm the setting.
To enter another setting, press M/m to highlight the next line and repeatstep
3.
5
Press MENU to exit the menu.
6
Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands by for
recording.
When using a cable box, leave it on.
OK
PLAY
OK
PLAY
INPUT
SELECT
• CH
TIMER SET / CHECK
FRI9/28
DATE STOP CHSTART
9 SUN080
PM PM
0:90053SP:3/
–– –––: –––––––:–/
–– –––: –––––––:–/
–– –––: –––––––:–/
–– –––: –––––––:–/
–– –––: –––––––:–/
–– –––: –––––––:–/
–– –––: –––––––:–/
RETURN
MENUQUIT :
SET :
SELECT :
END: OK
OK
PLAY
MENU