Sony PLP-91/D TV Mount User Manual


  Open as PDF
of 7
 
INSTALLATION INSTRUCTIONS
Sony Electronics Inc. 8805-000185
1 Sony Drive
Park Ridge, NJ 07656
201-930-1000
www.sony.com/displaysystems
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 125 POUNDS
(
56.7 KG
)
.
PSB-91/D
PLASMA DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Plasma Bracket (4) Mounting Buttons – Tapped
(4) 10-24 x ½ Button Head Cap Screw (1) 1/8 Allen Key
(4) M5 x 20mm Phillips Head Cap Screw (4) .875 OD x .33 ID x .375 Nylon Spacer
(4) M6 x 20mm Button Head Cap Screw (1) M4 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
PLASMA DISPLAYS ARE EXTREMELY FRAGILE.
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button,
with chamfered hole of mounting button (larger surface) facing bracket, to bracket (four places) (see
Figure 2 & Figure 3).
CAUTION!
WARNING!
Figure 1
Figure 2
Figure 3
 previous