Filter
Top Products
59
•Even if you select “MD” as the “Disc Mode”
setting, the operation mode can only be “Hi-
MD” when using a 1GB Hi-MD disc.
•The operation mode set in the “Disc Mode”
menu is applied to a blank 60/74/80-minute
standard disc used on the recorder even if a
different operation mode was selected in the
SonicStage software or a different operation
mode appeared on the display after the disc
was formatted by the SonicStage software.
Adjusting the contrast
of the display window
(Contrast Adjustment)
You can adjust the contrast of the display
window.
1 While the recorder is stopped, enter
the menu and select “Option” -
“Contrast”.
2 Turn the jog dial to adjust the
contrast, and then press NENT to
enter the selection.
Changing the
operational direction of
the display
When you turn the jog dial clockwise, the
display scrolls downward. This is the
factory setting. You can change the
factory setting to scroll in the opposite
direction.
1 Enter the menu and select “Option” -
“Jog Dial”.
2 Turn the jog dial until “Reverse”
appears in the display, and then press
NENT to enter the selection.
To turn the setting to normal
Select “Default” in step 2.
Notes
5-way control key
(NENT)
NAVI/
MENU
Jog dial
5-way control key
(NENT)
NAVI/
MENU
Jog dial