Filter
Top Products
51Additional Information
•Press A/B until “AUTO” appears on
the screen.
•Press or .
• Check the antenna cable and
connection on the projection TV, VCR
and on the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
•Press A/B until a better sound is heard.
—
•
Check the antenna cable and connection
on the projection TV, VCR, and at the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
•Try using a booster.
• Use the fine tuning (”FINE”) function.
• Use the fine tuning (”FINE”) function.
__
Projection TV
cannot receive
stereo broadcast
signal.
Stereo broadcast
sound switches
on and off or
is distorted.
or
The sound switches
between stereo and
monaural
frequently.
“100?” appears at
the top of the
screen after
approximately 10
seconds and there is
no Teletext display.
Teletext display is
incomplete
(snowy picture or
double images).
Lines moving across
the TV screen.
Cannot play
shooting games.
Possible cause
Symptom
Solutions
• The stereo reception
setting is
inappropriate.
• The sound of the right
picture is selected
when TWIN pictures
are displayed.
•
The connection is loose
or the cable is
damaged.
• The antenna
direction needs
adjustment.
• The broadcast signal
has a transmission
problem.
• The channel carries
no Teletext
broadcast.
• Connection is loose
or the cable is
damaged.
• The antenna
direction
is inappropriate.
• Signal transmission
is too low.
• There is interference
from external
sources, e.g., heavy
machineries, nearby
broadcast station.
• Some shooting games
which involve
pointing a light beam
at the projection TV
screen with an
electronic gun or rifle
cannot be used with
your projectiion TV.
For detail, see the
instruction manual
supplied with the
video game software.
Page
27
21
6
–
26
28
6
–
–
46
46
–
continued