Filter
Top Products
11
Location of Parts and Basic Remote Operations
a) “SIDE A/B” appears for non-Sony LD players.
b) Only with Sony TVs with the picture-in-picture function.
c) Only with Sony TVs that supports the wide-picture mode.
d) Only with the Sony CD changer.
Note
If you have programmed the remote to control non-Sony
components, note the following:
— All the items may not appear when you select a component.
— All the items displayed may not function.
z
To perform title and set up menu operations on the DVD
player
1 Select the DVD player from the function list.
2 Press SUB.
3 Move the easy scroll key to select “TITLE” (for the title menu)
or “SET UP” (for the set up menu), then press the key to enter
the selection.
4 Open up the cover on the remote and move the easy scroll key
to select ”DVD” from the CURSOR TYPE list, then press the
key to enter the selection.
5 Use the cursor buttons and the EXECUTE button to perform
menu operations on the DVD player.
To exit the menu operation
1 Close the cover on the remote.
2 Press SUB.
3 Move the easy scroll key to select “TITLE” or “SET UP”, then
press the key to enter the selection.
To display the DVD menu, use the MENU button. For details,
see “qk MENU button” on page 7.
z
You can freely assign codes to SUB1 through SUB5
Select when you transmit learned codes. For details, see
“Learning the Commands of your components” on page 18.
Component Item(s) Function
MD deck CONTINUE Selects Continuous Play
SHUFFLE Selects Shuffle Play
PROGRAM Selects Program Play
REPEAT Selects Repeat Play
DISPLAY Changes the information on
the display
MENU/NO Selects editing operation or
(EDIT) cancels editing
YES Performs editing operation
REC Pauses for recording
DAT deck REC Pauses for recording
REPEAT Starts Repeat Play
CLEAR Erases a track in the program
etc.
Tape deck A-REC Makes deck A pause for
recording
B-REC Makes deck B pause for
recording
Projector POWER ON Turn on the projector
POWER OFF Turn off the projector
INPUT A Switch to the input from
INPUT A jacks
INPUT B Switch to the input from
INPUT B jacks
INPUT VIDEO Switch to the input from
VIDEO jacks
INPUT SELECT Switch to the input from
VIDEO IN or S VIDEO IN
jacks
MEMORY Store the adjusted data in
memory
BRIGHT + Adjust the brightness
BRIGHT –
CONTRAST + Adjust the contrast
CONTRAST –
ZOOM +
ZOOM –
SHIFT +
SHIFT –
FOCUS +
FOCUS –
Adjust the zoom of the
picture
Adjust the lens shift of the
picture
Adjust the focus of the
picture