Filter
Top Products
18
Using the Lists
z
In step 6, when “*” is displayed in front of the function
The function is pre-programmed.
z
In step 3 and 7, when “x” is displayed after the program
number.
The codes have already been programmed.
Note
If you select “IR SET” for a component that already has a learned
button setting, the learned codes for that component are cleared.
Furthermore, if the cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to “NO SET”.
Starting macro play
1 Press FUNCTION.
The function list appears.
C D
TUNER
PHONO
5.1CH
2 Move the easy scroll key to select “MACRO 1” or
“MACRO 2”, then press the key to enter the
selection.
The IR codes appear in the display window as they are
performed.
Notes
• Pressing any of the following buttons during a macro play
operation will cancel the macro play sequence before it is
complete.
–AV ?/1
– ?/1
– SYSTEM STANDBY
– SOUND FIELD
– FUNCTION
– SET UP
• When the Macro Play function does not work properly, set
“WAIT TIME” between each operation.
Performing Several Commands in Sequence
Automatically (Macro Play)
Learning the Commands of
your components
By using the Learning function, it is possible for this
commander to perform learned operations.
Setting remote control codes that are not
stored in the commander
When a remote control code is not one of the presets
stored in the commander, it is possible for the commander
to learn the code using the Learning function.
1 Press SET UP and move the easy scroll key to select
“LEARNING”, then press the key to enter the
selection.
The function list appears.
<LEARNING>
[VIDEO 1 ]
[VIDEO 2 ]
[VIDEO 3 ]
2 Move the easy scroll key to select the function you
want to use the Learning function, then press the
key to enter the selection.
The button list appears.
Button[VIDEO 2 ]
*POWER
REVERSE
*PLAY
3 Move the easy scroll key to select the button you
want to use for the Learning function, then press
the key to enter the selection.
The learning display appears.
[VIDEO 2 ]
(REVERSE)
LEARNING Start
CLEAR
4 Point the remote code receiver section of the
commander toward the receiver/transmitter on the
remote control to be learned.
5 Move the easy scroll key to select “Learning Start”,
then press the key to enter the selection.
“Learning Now!!” is displayed.
Function
Button
About 5 cm ~ 15 cm
AV ?/1
FUNCTION
SET UP
SOUND FIELD
?/1
PUSH ENTER
SUB
BASS
BOOST
MASTER
VOL
MUTING
CH/PRESET/D.SKIP
–
+
+
–
SYSTEM
STANDBY
h
Xx
H
.>
mM