Filter
Top Products
Using the lists
13
GB
Selecting a component
Basic procedure for selecting
a component
Do the procedure below to select a component
from the function list.
1 Press FUNCTION.
The function list appears. The items in the
list correspond with the jacks on the
receiver.
MD/DAT
pCD/SACD
TUNER
PHONO
2 Move the easy scroll key to select a
component from the list, then press the
key to enter the selection.
Information about the component appears in
the display window.
A display example
<CD/SACD >
CD1
Sony
Tips
• You can modify the category indication. The
category indication tells you what component is
actually connected to the jacks on the receiver. If a
component is connected to jacks for which they are
not originally meant, you can modify the category
indication to match the component. For details, see
“Programming the Remote” on page 15.
• You can set the remote to automatically turn on a
component when it is selected from the function
list. For details, see “Using the auto power
function” on page 20.
• You can sort the function list (page 19).
• To switch MULTI CH 1 and 2, move the easy scroll
key to select MULTI CH in step 1, then press the
key to enter the selection.
Depending on the component that you selected,
you may have to do an additional procedure, or
you may be able to obtain detailed information
about the component by doing an additional
procedure. For details, see “Additional
procedures after selecting a component” on this
page.
Additional procedures after
selecting a component
If you selected tuner
Do the procedure below after you have selected
the tuner.
1 Move the easy scroll key.
The preset station list appears.
2 Move the easy scroll key to select the
preset station, then press the key to
enter the selection.
The current status of the component appears
in the display window.
Selected component
Category
Maker of the
component
continued