Filter
Top Products
16
GB
Performing several
commands in sequence
automatically (Macro Play)
The Macro Play function lets you link several
IR codes in a sequential order as a single
command. The remote provides 2 macro lists
(MACRO 1 and 2). You can specify up to 16
IR codes for each macro list.
Setting the sequence of IR
codes
1 Press RM SET UP.
The set up list appears.
pIR SET
MENU EDIT
AUTO POWER
BACK LIGHT
2 Move the easy scroll key to select “IR
SET”, then press the key to enter the
selection.
The IR SET list appears.
<IR SET>
pMACRO1
MACRO2
Exit
3 Move the easy scroll key to select
“MACRO1” (or “MACRO2”), then press
the key to enter the selection.
The program list appears.
<MACRO1>
p 1-NO SET
2-NO SET
3-NO SET
4 Move the easy scroll key to select the
macro step number (“1-NO SET” for
example) then press the key to enter
the selection.
The category list appears.
Category?
pCommon
Button
VCR
5 Move the easy scroll key to select the
component category (“VCR” for
example), then press the key to enter
the selection.
The maker list appears.
Maker?
pSony VTR1
Sony VTR2
Sony VTR3
6 Move the easy scroll key to select the
maker, then press the key to enter the
selection.
The function list appears.
Function?
p*POWER
*PREVIOUS
*NEXT
7 Move the easy scroll key to select the
IR code for the operation you want to
perform, then press the key to enter the
selection.
The program list reappears.
<MACRO1>
p 1-POWER
2-NO SET
3-NO SET
8 Repeat steps 4 through 7 to program
up to 16 IR codes.
When you have finished programming IR
codes, select “Exit” in step 7.