Filter
Top Products
Using the lists
17
GB
To delay the output of an IR code
1 In step 4, move the easy scroll key to select
“Common”, then press the key to enter
selection.
2 Move the easy scroll key to select “WAIT
TIME”, then press the key to enter selection.
3 Move the easy scroll key to select the time to
delay the output of an IR code, then press the
key to enter selection. You can specify from 1
to 10 second delay (in 1 second increments).
To erase a programmed IR code
1 In step 4, move the easy scroll key to select
“Common”, then press the key to enter
selection.
2 Move the easy scroll key to select “NO SET”,
then press the key to enter selection.
To turn off all Sony components
(SYSTEM STANDBY)
1 In step 4, move the easy scroll key to select
“Common”, then press the key to enter
selection.
2 Move the easy scroll key to select “ALL OFF”,
then press the key to enter selection.
However, this function cannot be applied to
some Sony components.
To cancel programming
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
Tips
• In step 6, when “*” is displayed in front of the
function, the function is pre-programmed.
• In step 3 and 7, when “NO SET” is displayed after
the program number, the codes have not been
programmed.
Starting macro play
1 Press FUNCTION.
The function list appears.
USER1
USER2
pMACRO1
MACRO2
2 Move the easy scroll key to select
“MACRO1” or “MACRO2”, then press
the key to enter the selection.
The IR codes appear in the display window
as they are performed.
Notes
• Pressing any of the following buttons during a
macro play operation will cancel the macro play
sequence before it is complete.
– AV ?/1
– ?/1
– SYSTEM STANDBY
– SOUND FIELD
– FUNCTION
– RM SET UP
• When the Macro Play function does not work
properly, set “WAIT TIME” between each
operation.