Filter
Top Products
3
GB
Features
The RM-AV2500T Remote Commander
provides centralized control of all your
AV components from a single remote
commander and saves the trouble of
operating different AV components with
different remote control devices. The
following are its main features.
Centralized control of Sony AV
components with this one remote
commander
This Commander is preset at the factory
to operate Sony brand components, so
you can use it out of the box as a control
centre for your Sony AV components.
Remote control signals for non-Sony
components are also preset
This Commander is preset for most major
brands components including Sony. You
can remote control your components by
setting their code numbers (page 8).
Learning function for programming
other remote control signals you
need
This Commander has a learning function,
to learn remote control signals to operate
non-preset components or functions
(page 15).
In addition, the Commander can learn
remote control signals (infrared signals
only) of non-Audio Visual components
such as air-conditioners, lights, etc. (some
specific appliances or functions may not
be available) (page 35).
Setting a maximum of 24 macro
commands of a maximum of 32
successive steps
A maximum of 24 macro commands
which provide a maximum of 32
successive steps by pressing a single
button can be set (12 system control
macros and 12 component macros).
Macro execution speed is changeable. All
power on/off macro commands for Sony
components are preset at the factory.
Multi component in one screen
When you operate a lot of equipment all
together, you need not change the screen.
When watching a DVD, the DVD run
system key, the Power key for TV and
Receiver or the input change key can be
displayed on one screen, and it can be
operated, without switching the screen.
Alias function
Keys memorized on other screen can be
link, it is not necessary to learning again.
For example, it is useful to display the
Power key for TV or the input change
key on the CABLE screen (page 43).
Channel macro function allows you
to select a channel with a single key
Up to 4 key steps can be programmed on
macro keys. If you set the key operations
for entering a channel number on a
macro key, you can select the channel by
pressing that macro key (page 41).
Easy-to-operate touch key LCD with
blue back light
This Commander has a touch key LCD
that changes the key display according to
the selected component. The Commander
is easy to operate as only the keys
necessary to operate the selected
component are displayed. The display
backlight allows operation even in the
dark.