Filter
Top Products
75
Running a System Test
The System Test lets you check the integrity of your system's
components, including:
q Antenna signal
q System tuning
q Phone line
q Access card
Use the System Test if you are experiencing problems with your
system.
To run the System Test:
1 Select SYSTEM TEST from the Setup Menu.
2 Select TEST.
The System Test checks all the components automatically, and
displays the result of each test.
3 Select RETURN to return to the Setup Menu.
If The System Test Reports
Any Problems...
Check your system for any of the following:
q Check that all cables are connected properly to the Digital Satellite
Receiver.
q Check that the Satellite Antenna is installed correctly, and that the
signal has been optimized. See the manual that came with the
Satellite Antenna for details.
q Check that the phone line connected to the Digital Satellite
Receiver is working properly.
q Check that the access card is inserted properly.
If you cannot resolve problems reported by the System Test, see
“Customer Support” on page 2.
RUN SYSTEM TEST
RETURN
HELP
TEST
SIGNAL
TUNING
PHONE
CARD