Filter
Top Products
14
Advanced Connection: Connecting Your IR
Blaster
1
/2
"
to 1
"
Satellite Receiver
VCR (front)
IR Sensor
In front of the VCR
Place the IR Blaster under and
in front of the VCR.
The IR Blaster must extend just
in front of the infrared sensor
of the VCR.
1
2
2
1
To allow the Satellite
Receiver to control your VCR
Connect the IR Blaster to the VCR
CONTROL jack on the Satellite
Receiver.
z Tip
If the infrared sensor is not
marked on your VCR, shine a
flashlight into the front panel of
the VCR to locate the sensor.