Filter
Top Products
9
Getting Started
Getting Started
Hookup 1: VCR setup
1 Set the RF UNIT switch to
CH3 or CH4, whichever
channel is not used in your
area. If both are used, set
the switch to either channel.
For details, see page 45. If you made A/V connections (page 7), you
can skip this step.
2 Change the on-screen display language if desired. For details, see
page 18.
1 Press MENU and select LANGUAGE.
2 Select the language, and press OK.
3 Press MENU and select TUNER PRESET. Set
ANTENNA/CABLE to ANT. For details, see
page 19.
4 Preset the channels into the VCR. Select
AUTO PRESET and press OK.
CH3
RF UNIT
CH4
LANGUAGE
ENGLISH
ESPAÑOL
TUNER PRESET CH2
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
ANT
ADD
ON
•
•
•
CABLE
ERASE
OFF
TUNER PRESET CH2
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
ANT
ADD
ON
•
•
•
CABLE
ERASE
OFF
PLEASE WAIT