Filter
Top Products
12
Connecting the VCR
Additional connections
To a stereo system
(SLV-SE700N/K and SE800N
only)
You can improve sound quality
by connecting a stereo system to
the AUDIO OUT R/L jacks as
shown on the right.
To a TV with audio and
video jacks
(SLV-SE500R, SE700R and
SE800K only)
If your TV does not have a Scart
(EURO-AV) connector, you can
improve sound and picture
quality by connecting your TV
to the LINE-2 OUT jacks as
shown on the right.
* SLV-SE500R has only AUDIO L
(left) and VIDEO jacks.
To a satellite or digital tuner
with Line Through
(not available on SLV-
SE350K, SE500R, SE600N
and SE700R)
Using the Line Through
function, you can watch
programmes from a satellite or
digital tuner connected to this
VCR on the TV even when the
VCR is turned off. When you
turn on the satellite or digital
tuner, this VCR automatically
sends the signal from the
satellite or digital tuner to the TV without turning itself on.
1
Connect the satellite or digital tuner to the DECODER/LINE-3 IN
*
1
(or
DECODER/LINE-2 IN
*
2
) connector as shown above.
2
Set DECODER/LINE3
*
1
(or DECODER/LINE2
*
2
) to LINE3
*
1
(or LINE2
*
2
) in
the OPTIONS-2 menu.
Audio cable (not supplied)
AUDIO OUT
R/L
LINE IN
: Signal flow
Audio/video cable (not
supplied)
: Signal flow
LINE-2 OUT*
AUDIO R (right)/L (left)/
VIDEO
Scart cable (not supplied)
DECODER/
t LINE-3 IN*
1
or DECODER/
t LINE-2 IN*
2
LINE OUT
: Signal flow