Filter
Top Products
54
Recording TV programmes using the ShowView system (not available on SLV-SE500R, SE600N and
SE700R)
1
Press
TIMER.
• When you set TIMER OPTIONS to
VARIABLE:
The TIMER METHOD menu appears
on the TV screen. Press
M
/
m
to select
SHOWVIEW, then press OK.
• When you set TIMER OPTIONS to
SHOWVIEW:
The SHOWVIEW menu appears on the
TV screen.
2
Press the programme number buttons to
enter the ShowView number.
If you make a mistake, press CLEAR and
re-enter the correct number.
3
Press OK.
The date, start and stop times, programme
position or station name, tape speed, and
VPS/PDC setting appear on the TV screen.
• If “– –” appears in the “PROG.”
(programme) column (this may happen
for local broadcasts), you have to set the
appropriate programme position
manually.
Press
M
/
m
to select the desired programme position.
To record from a decoder or other source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line in the
“PROG.” position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
TIMER
OK
PLAY
SET :
SELECT :
OK
MENUEXIT :
TIMER METHOD
STANDARD
SHOWVIEW
MENUEXIT :
SHOWVIEW
SET :
–
0–9
SHOWVIEW NO.
––––––– –
THU28.9
123
456
789
0
CLEAR
MENUEXIT :
SHOWVIEW
SET :
–
0–9
SHOWVIEW NO.
1246––– –
THU28.9
CANCEL
CONFIRM
:
:
OK
CLEAR
CLEAR
OK
PLAY
INPUT SELECT
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC ON
THU28.9