Filter
Top Products
12
Connecting the VCR
Additional connections
To a stereo system
You can improve sound quality
by connecting a stereo system to
the AUDIO OUT R/L jacks as
shown on the right.
To a set top box with Line
Through
Using the Line Through
function, you can watch
programmes from a set top box
connected to this VCR on the
TV even when the VCR is
turned off. When you turn on
the set top box, this VCR
automatically sends the signal
from the set top box to the TV
without turning itself on.
Note
• You cannot watch programmes on the TV while recording unless you are recording a
programme from your set top box.
*
1
SLV-SE800G and SE800I only
*
2
SLV-SE700G and SE700I only
1
Connect the set top box to the LINE-3 IN*
1
(or LINE-2 IN*
2
) connector as shown
above.
2
Set POWER SAVE to OFF in the OPTIONS-2 menu.
3
Turn off the VCR.
To watch a programme, turn on the set top box and the TV.
Audio cable (not supplied)
AUDIO OUT
R/L
LINE IN
: Signal flow
Scart cable (not supplied)
t LINE-3 IN*
1
or t LINE-2 IN*
2
LINE OUT
: Signal flow