Filter
Top Products
49
Recording TV programmes using the VIDEO Plus+ system
Basic Operations
1
Press TIMER.
• When you set TIMER OPTIONS to
VA RI AB L E:
The TIMER METHOD menu appears
on the TV screen. Press M/m to select
VIDEO Plus+, then press OK.
• When you set TIMER OPTIONS to
VIDEO Plus+:
The VIDEO Plus+ menu appears on the
TV screen.
2
Press the programme number buttons to
enter the PlusCode.
If you make a mistake, press CLEAR and
re-enter the correct number.
3
Press OK.
The date, start and stop times, programme
position or station name, tape speed, and
VPS/PDC setting appear on the TV screen.
• If “– –” appears in the “PROG.”
(programme) column (this may happen
for local broadcasts), you have to set the
appropriate programme position
manually.
Press M/m to select the desired programme position.
To record from another source connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the
“PROG.” position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
TIMER
OK
PLAY
SET :
SELECT :
OK
MENUEXIT :
TIMER METHOD
STANDARD
VIDEO Plus+
MENUEXIT :
SET :
–
0–9
––––––– –
THU28.9
VIDEO Plus+
PLUSCODE
123
456
789
0
CLEAR
MENUEXIT :
VIDEO Plus+
SET :
–
0–9
PLUSCODE
1246––– –
THU28.9
CANCEL
CONFIRM
:
:
OK
CLEAR
CLEAR
OK
PLAY
INPUT SELECT
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC OFF
THU28.9
continued