Filter
Top Products
18
Connecting the VCR
Note
• Not all TVs respond to the functions above.
Additional connection
To a stereo system
(not available on
SLV-SE610B)
You can improve sound
quality by connecting a
stereo system to the
(audio out) R/D L/G jacks as
shown on the right.
To a satellite or digital
tuner with Line Through
Using the Line Through
function, you can watch
programmes from a satellite
or digital tuner connected to
this VCR on the TV even
when the VCR is turned off.
When you turn on the satellite
or digital tuner, this VCR
automatically sends the signal
from the satellite or digital
tuner to the TV without turning itself on.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a satellite or digital programme.
*
1
SLV-SE810B only
*
2
SLV-SE610B, SE710B, and SX710B only
1
Connect the satellite or digital tuner to the DECODEUR/ENTREE
LIGN-3*
1
(or DECODEUR/ENTREE LIGNE-2*
1
) connector as shown
above.
2
Set DECODEUR/ENTREE LIGN-3*
1
(or DECODEUR/ENTREE
LIGNE-2*
1
) to LIGNE3*
1
(or LIGNE2*
2
) in the OPTIONS-2 menu.
3
Set VEILLE ECO to NON or PARTIELLE in the OPTIONS-2 menu.
4
Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Audio cable (not supplied)
R/D L/G
LINE IN
: Signal flow
PERITEL cable (not supplied)
DECODEUR/
t
ENTREE
LIGNE-3
*
1
or
DECODEUR/
t
ENTREE
LIGNE-2
*
2
SORTIE
LIGNE
: Signal flow