Filter
Top Products
22
Setting up the VCR with the Auto Set Up function
Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set
Up function. With this function, you can set the TV channels, guide
channels for the ShowView system*, and VCR clock automatically.
To cancel the Auto Set Up function
Press REGLAGE AUTO.
Tip
• If you want to change the language for the on-screen display from the one preset in
the Auto Set up function, see page 24.
Hold down REGLAGE AUTO on the VCR for more than three seconds.
The VCR automatically turns on, starts searching for all of the
receivable channels, and presets them in the appropriate order for
your local area (according to the TV system you selected in “Tuning
your TV to the VCR”).
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme
positions” on page 30.
If you use the SMARTLINK connection (not available on SLV-
SE610B), the Preset Download function starts and the indicator
flashes in the display window during download.
After the search or download is complete, the current time appears
in the display window for any stations that transmit a time signal
(not available on SLV-SE610B). If the time does not appear, set the
clock manually. See page 35.
REGLAGE AUTO
REGLAGE
AUTO
REGL CANAL