Filter
Top Products
75
Storing, searching and deleting programme information (Acces Smart Plus)
Additional Operations
To assign a memory number after recording
After recording a programme, you can store the programme information as a new
memory before ejecting the cassette. However, you can not add the memory on the
existed memory bank number. To store the memory as additional, select the memory
bank number before.
To exit the ACCES SMART screen
Press ACCES SMART.
Note
• If you select a number that is already contains programmes, the old programme
information is cleared and the new programme information is stored.
Searching for programme information stored on the memory bank
number
You can start playback of the recorded programme after calling the programme
information from the four memory bank numbers.
1
Press ?/1 to turn on the VCR.
2
Press ACCES SMART.
3
Press ACCES SMART again.
The ACCES SMART -ENREG.- screen
appears.
4
Press </, to select a memory bank
number.
Select the memory bank number with no
information or the memory bank number
to be deleted.
To cancel the process, select ANNULER.
5
Press OK.
:
DATE HEURE PROG.
:
:
OK
ACCES SMART
180MIN.
REGLER
SELECTIONNER
ENREG.
ACCES SMART
30MIN.ESPACE VIERGE
14:00 15:00 FGH
0
29.9
.93 20:00 21:00
AAB
6:30 7:00
1.10 IJK
20:00 21:00 AAB30.9
6:30 7:00
1.10
14:00 15:00
FGH29.9
ACCES SMART -ENREG.-
DATE HEURE PROG.
ANNULER 1 2 3 4
IJK
:
SELECTIONNER
:
:
OK
SORTIE
REGLER
ACCES SMART
ACCES SMART -ENREG.-
DATE HEURE PROG.
ANNULER 1 2 3 4
20:00 21:00 AAB30.9
6:30 7:00
1.10
14:00 15:00
FGH29.9
IJK
:
SELECTIONNER
:
:
OKREGLER
SORTIE
ACCES SMART
continued