Filter
Top Products
78
Storing, searching and deleting programme information (Acces Smart Plus)
Note
• You can not use or return the deleted information.
About the Demonstration Mode
The Acces Smart Plus function has a Demonstration Mode that allows the user, such
as a salesperson, to automatically display the Acces Smart Plus screens.
To activate the Demonstration Mode
While the VCR is turned on, press and hold the both
x
(stop) and
A
(eject)
buttons on the VCR
for a few seconds. The demonstration will start and the
four kinds of Acces Smart Plus screens will be displayed repeatedly. If you
operate the VCR, the Demonstration Mode temporarily stops. After about
five minutes, the demonstration will restart.
To cancel the Demonstration Mode
While the VCR is turned off, press and hold the both
x
(stop) and
A
(eject)
buttons on the VCR
for a few seconds. You can also cancel the
Demonstration Mode if you turn the power off and unplug the mains lead.
3
Press ANNUL/0.
The programme information is deleted.
4
Press ACCES SMART.
The ACCES SMART screen disappears.
:
ACCES SMART -RAPPEL-
:
:
OK
DATE HEURE PROG.
RAPPEL 1 2 3 4
REGLER
SELECTIONNER
SORTIE
PAS DE DONNEES
ACCES SMART