Filter
Top Products
12
Connecting the VCR
Additional connections
To a stereo system
(not available on
SLV-SE600A/E and SX600E)
You can improve sound quality
by connecting a stereo system to
the AUDIO OUT R/L jacks as
shown on the right.
To a satellite or digital tuner
with Line Through
(not available on
SLV-SE600A)
Using the Line Through
function, you can watch
programmes from a satellite or
digital tuner connected to this
VCR on the TV even when the
VCR is turned off. When you
turn on the satellite or digital
tuner, this VCR automatically
sends the signal from the
satellite or digital tuner to the
TV without turning itself on.
Note
• You cannot watch programmes on the TV while recording unless you are recording a satellite
or digital programme.
*
1
SLV-SE800D1/D2/E and SX800D only
*
2
SLV-SE600E, SX600E, SE650D, SE700D1/D2/E1/E2, and SX700D/E only
1
Connect the satellite or digital tuner to the DECODER/LINE-3 IN*
1
(or
DECODER/LINE-2 IN*
2
) connector as shown above.
2
Set DECODER/LINE3*
1
(or DECODER/LINE2*
2
) to LINE3*
1
(or LINE2*
2
) in
the OPTIONS-2 menu.
3
Set POWER SAVE to OFF in the OPTIONS-2 menu.
4
Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Audio cable (not supplied)
AUDIO OUT
R/L
LINE IN
: Signal flow
Scart cable (not supplied)
DECODER/
t LINE-3 IN*
1
or
DECODER/t
LINE-2 IN*
2
LINE OUT
: Signal flow