Sony SLV-SX800D VCR User Manual


 
81
Connecting to a VCR or stereo system
Editing
Example C
How to connect to a stereo system
(SLV-SE800D1/D2/E and SX800D only)
Connect the LINE-2 IN AUDIO L/R jacks on this VCR to the audio output jacks on
the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
Make sure you connect the plugs to jacks of the same colour.*
1
If the other VCR is a monaural type, leave the red plugs unconnected.
If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-2106HG cable
instead and connect the cable to the line out jacks of the other VCR.
When you connect another VCR to the DECODER/LINE-3 IN*
1
(or DECODER/LINE-2
IN*
2
) connector, set DECODER/LINE3*
1
(or DECODER/LINE2*
2
) to LINE3*
1
(or
LINE2*
2
) in the OPTIONS-2 menu.
*
1
SLV-SE800D1/D2/E and SX800D only
*
2
SLV-SE600E, SX600E, SE650D, SE700D1/D2/E1/E2, and SX700D/E only
TV
DECODER/
t LINE-3 IN*
1
or
DECODER/
t LINE-2 IN*
2
VMC-2121HG Scart cable (not supplied)
Scart
(EURO-AV)
: Signal flow
Your VCR (Recorder)
Other VCR (Player)