Filter
Top Products
Basic VCR Operations
38
Recording TV programmes
using VIDEO Plus+ (continued)
4 Close the top cover of the remote
commander, then press ENTER to
confirm.
The date, start and stop times,
programme position, and tape speed
appear on the TV screen.
If you want to turn on the PDC function,
or add daily/weekly settings on the
programme, see page 40 and change the
TIMER SET/CHECK menu.
For details on the PDC function, see
“Timer recording with PDC signals” on
page 41.
If the information is not correct, press
TIMER CLEAR to cancel the setting.
5 To enter another setting, repeat
steps 1 through 4.
6 Press TIMER REC ON/OFF.
The TIMER indicator appears in the
display window and the unit’s VCR
stands by for timer recording.
The picture and sound switch to the TV.
LP
:
SP / LP
69147782 –
CANCEL
TIMER CLEAR
RECORDING TIME
:
DATE START STOP PROG
LP
850022
:
00022.
TUE10
1
V / P
VIDEO Plus+
PLUSCODE
Tip
• TIMER REC on the unit has
the same function as TIMER
REC ON/OFF on the
remote commander.
Note
• If you selected any audio
input while watching the
unit’s VCR picture before
the unit’s VCR enters
recording standby, only the
picture switches to the TV
after you press TIMER REC
ON/OFF.
To stop recording
To stop the unit‘s VCR while recording, press TIMER REC ON/OFF.
To record satellite broadcasts
If you connect a satellite tuner and the unit, you can record satellite
programmes.
1 Turn on the satellite tuner.
2 Press VHS LINE (if the satellite tuner is connected to the unit with
the LINE jacks).
3 On the satellite tuner, select the satellite programme for which you
wish to make a timer setting.
4 Repeat the steps 1 through 6 starting on page 37.
5 Keep the satellite tuner turned on until the unit’s VCR finishes the
timer recording.