Filter
Top Products
Audio/Video Equipment Operations
54
Controlling a cassette deck
(continued)
4 Lift the top cover of the remote commander and press r REC to set
the cassette deck to recording pause.
5 Press ( DIRECTION (or 9 DIRECTION to record on the reverse
side).
Recording starts.
6 Play back the programme source.
Additional tasks
To Press
Stop recording p STOP
Pause recording P PAUSE
Resume recording P PAUSE, ( DIRECTION, or 9 DIRECTION
Customizing the remote commander for deck A of
a double-cassette deck
The remote commander’s TAPE/MD button is factory set to operate
single-cassette decks or deck B if you have a double-cassette deck.
To control deck A, first you need to customize one of the function
buttons for deck A.
You can customize the VIDEO 1, VIDEO 2, CD, TAPE/MD, or TV
function buttons. While pressing the selected function button, press the
number button 5. (You must select the function button corresponding to
the input jacks the cassette deck is connected to.)
Now that function button operates deck A. To change the button’s
function again, see “Customizing the remote commander function
buttons” on page 80.
To play back a tape, follow the instructions in “Playing a tape” on the
previous page. During the procedure, press the function button you
customized for deck A in step 1 instead of TAPE/MD, and insert a
recorded cassette into deck A in step 2 instead of deck B.