Filter
Top Products
Basic Operations
39
US
Recording from a connected equipment using the timer
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x STOP.
Daily/weekly recording
In step 3, press v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press V to change the indication in reverse order.
the current date t Daily t Mo~Sa t Mo~Fr tSun’s t Mon’s t ..... t Sat’s
t 1 month later t (dates count down) t the current date
3
Set the line input (L1 or L2), start and stop
times, date, and tape speed:
1 Press b to select each item in turn.
2 Press V/v to set each item.
To correct a setting, press B to return to that
setting and reset.
• To select a source connected to the LINE IN
1 or LINE-2 IN jacks, press INPUT SELECT or V/v to display “L1” or
“L2” in the “L1/L2” position.
• To record the same program every day or the same day every week, press
v while the date is flashing. For details, see “Daily/weekly recording” on
page 39.
• To use the Auto Tape Speed function, press v to display “Auto” in the
“SPEED” position. For details, see “To use the Auto Tape Speed
function” on page 40.
4
Press b to confirm the setting.
To enter another setting, press V/v to select the next row and repeat step 3.
Press CLEAR to cancel the setting.
5
Press O RETURN to exit the menu.
6
The indicator appears in the display window and the VCR stands by for
recording. While recording, the connected cable box or satellite receiver
turned on and do not change their channel you want to record. Timer
recording will operate properly regardless if the DVD-VCR power is on or
off.
continued