Filter
Top Products
33
Playing discs
Basic Operations
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode (DVD, VIDEO CD and CD only)
Press m or M.
For DVD or VIDEO CD, each time you press the button, the playback speed changes
as follows.
×2 t FF1/FR1 t FF2/FR2 t FF3/FR3 t FF4/FR4 (DVD only) t
FF5/FR5 (DVD only)
Release the button at the desired speed.
For CD, the searching speed does not change (FF2/FR2 play).
When you find the point you want, press H.
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press X, then press M SLOW y. With each press, the playback speed changes
cyclically as follows.
To resume normal playback, press H.
Tip
• To make a video timer reservation during DVD playback, we recommend performing the
operations under “Quick Timer Recording” (page 96).
Notes
• You can change the screen type using the “REGLAGE DE L’ECLAN” menu. (See “Screen
Setup” on page 65.)
• Do not perform VIDEO playback while playing back a disc.
• If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
point of the scratch or skip to the next track.
• You cannot change the MP3 or the Multi Session CD playback speed.
• VIDEO CD fast foward/reverse cannot be paused.
• During CD fast forward/reverse play, no sound is output.
Notes on playing DTS* sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analog stereo jacks of the DVD player are connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be
connected to the digital jack of the DVD player.
• Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a
CD (page 82).
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Non” in
“Options Audio” menu (page 63), and may affect your ears or cause your speakers to be
damaged.
continued