Filter
Top Products
40 Editing
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the SET UP MENU (page 34). Use this feature to
listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is set
to ON, the AUDIO MONITOR button does not function. Remember to reset
AUDIO MIX to OFF after playing the tape.
To listen to the dubbed sound (normal audio)
Press AUDIO MONITOR until the “L,” “R,” and “STEREO” indicators go off
in the display window.
Audio dubbing from the microphone
Using the microphone, you can add songs or narration on a recorded
tape. Sound from the microphone is mixed with the original hi-fi sound
and recorded on the normal audio track.
Before you start dubbing
• Connect the microphone(s) to the MIC IN 1 and/or 2 jack(s), and turn
on the microphone(s).
1 Set KARAOKE ON/OFF to ON.
2 Insert the prerecorded tape into the unit. Search for the end of the
section to be replaced and press P PAUSE.
Make sure that the tape has its safety tab in place.
3 Press COUNTER RESET to reset the counter to “0H00M00S.”
4 Rewind the prerecorded tape to the beginning of the section to be
replaced.
The unit pauses.
5 Press AUDIO DUB.
The audio dubbing indicator
appears in the display window.
Audio dubbing (continued)
123
456
789
0
COUNTER
RESET
AUDIO DUB
KARAOKE ON/OFF
MIC IN 1/2
Microphone
P PAUSE