Filter
Top Products
33
Recording TV programmes using the VIDEO Plus+ system
Basic Operations
3
Press OK.
The programme position, date, start
and stop times, tape speed, and
VPS/PDC setting appear on the TV
screen.
• If “– –” appears in the “PR”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate
programme position manually.
Press M/m to select the desired programme position.
To record from another source connected to the input connector,
press INPUT SELECT to display the connected line in the “PR”
position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC setting:
1 Press </, to select the item
you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 34.
• To use the VPS/PDC function, set
V/P to ON. For details about the VPS/PDC function, see “Timer
recording with VPS/PDC signals” on page 34.
• To use the Auto Tape Speed function, press m to display “AUTO”
in the blank positions next to the “V/P” row. For details, see “To
use the Auto Tape Speed function” on page 34.
5
Press MENU to exit the menu.
6
Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands
by for recording.
To record from another source, leave the connected equipment
switched on.
CLEAR
OK
PLAY
INPUT
SELECT
EXIT
SET
MENU:
:
OK:END
SELECT
–– –––– –– –– – ––– ––::
PR DAY START STOP
V/P
FRISEP82/ 18:30
35SA2919002 00 –
LP
0::
–– –––– –– –– – ––– ––::
–– –––– –– –– – ––– ––::
–– –––– –– –– – ––– ––::
–– –––– –– –– – ––– ––::
:
OK
PLAY
EXIT
SET
MENU:
:
OK:END
SELECT
–– –––– –– –– – ––– ––::
PR DAY START STOP
V/P
ON
FRISEP82/ 18:30
35SA2919002 00
LP
0::
–– –––– –– –– – ––– ––::
–– –––– –– –– – ––– ––::
–– –––– –– –– – ––– ––::
–– –––– –– –– – ––– ––::
:
MENU
continued