Filter
Top Products
45
Recording TV programmes using the Dial Timer (SLV-SE840B only)
Basic Operations
To return to the previous step
To return to the previous step, press the CHAINE + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x (stop).
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 37).
• Display tape information on the TV screen (page 40).
• Check the timer settings (page 60).
• Watch another TV programme (page 40).
7
Press PROG.
The programme position or LIGNE input appears in the display
window.
8
Turn PROG to set the programme position.
To record from a decoder or other source connected to one or more
of the LIGNE inputs, turn PROG or press CHOIX ENTREE to
display the connected line in the display window.
9
Press PROG to complete the setting.
“OK” appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands
by for recording.
To record from a decoder or other source, leave the connected
equipment switched on.
PROG
PROG
CHOIX ENTREE
PROG
continued