Filter
Top Products
49
Recording TV programmes using the ShowView
®
system (not available on SLV-SE640B and SE240B)
Basic Operations
2
Press the programme number
buttons to enter the ShowView
number.
If you make a mistake, press
ANNUL/0 and re-enter the correct
number.
3
Press OK.
The date, start and stop times,
programme position, tape speed and
VPS/PDC setting appear on the TV
screen.
• If “– –” appears in the “ST”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate
programme position manually.
Press M/m to select the desired programme position.
• To record from a decoder or other source connected to one or
more of the LIGNE inputs, press CHOIX ENTREE to display the
connected line in the “ST” position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press ANNUL/0 to cancel the setting.
4
If you want to change the date, tape
speed and the VPS/PDC setting:
1 Press </, to select the item
you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 50.
• To use the VPS/PDC function, set V/P to P. For details about the
VPS/PDC function, see “Timer recording with VPS/PDC signals”
on page 50.
5
Press MENU to exit the menu.
123
456
789
0
ANNUL/0
MENU:OK:RÉGLER
CODE 0–9
SHOWVIEW
CODE 1234–––––
:
SORTIE
ANNUL/0
OK
CHOIX ENTREE
:OK:
–– –––– –– –– – –– ––::
35 SA29 19 00 2 000::
–– –––– –– –– – –– –
–
–::
–– –––– –– –– – –– ––::
–– –––– –– –– – –– ––::
–– –––– –– –– – –– –
–
SP
–
–
–
––::
–– –––– –– –– – –– ––::
–– –––– –– –– – –– –
–
––::
:
ST JOUR DÉBUT FIN
V/P
MENUFIN
SÉLECT.
SORTIE
RÉGLER :
OK
:OK:
–– –––– –– –– – –– ––::
35 SA29 19 00 2 00
P
0::
–– –––– –– –– – –– ––::
–– –––– –– –– – –– ––::
–– –––– –– –– – –– ––::
–– –––– –– –– – –– –
–
SP
–
–
–
––::
–– –––– –– –– – –– ––::
–– –––– –– –– – –– –
–
––::
:
ST JOUR DÉBUT FIN
V/P
RÉGLER
MENUFIN
SÉLECT.
SORTIE
:
MENU
continued