Filter
Top Products
59
Synchronized Recording (not available on SLV-SE640B and SE240B)
Additional Operations
To cancel the Synchronized Recording function
Press ENR SYNCHRO on the VCR. The ENR SYNCHRO indicator
disappears.
To stop recording
Press x (stop) while recording.
Notes
• This function may not work with some types of satellite tuners.
• Some TVs or other equipment with timer functions will automatically turn off if no
operation is performed within a certain amount of time. In this case, the
Synchronized Recording also stops automatically.
• When the connected equipment turns on while the ENR SYNCHRO indicator
lights up in red, recording starts automatically.
• If the settings for timer recording and Synchronized Recording overlap, the
programme that starts first has priority and the second programme starts recording
only after the first programme has finished.
• The Auto Clock Set function does not work while the VCR stands by for
Synchronized Recording.
*
1
SLV-SE840B
*
2
SLV-SE740B, SE640B and SE240B
Recording programmes using
the Synchronized Recording
function
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• Refer to “Index to parts and controls” for
button locations.
1
Press CHOIX ENTREE or CHAINE +/– to display “L3*
1
(or L2*
2
)” in
the display window.
2
Set the timer on the connected equipment to the time of the programme
you want to record, then turn it off.
3
Press SP/LP to select the tape speed.
4
Hold down ENR SYNCHRO on the VCR for more than two seconds.
The ENR SYNCHRO indicator lights up in red and the VCR stands by
for recording.
The VCR automatically turns on and starts recording when it receives an
input signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or
when the connected equipment stops transmitting an input signal.
ENR SYNCHRO button/indicator