Filter
Top Products
18
Tuning your TV to the VCR
filename[01GB04GET-NP0.fm] model name1[SLV-SF950N] model name2[]
[3-062-331-
12
(1)]
If you have connected your VCR to the TV with a Scart
(EURO-AV) connector and an aerial cable as well
In order to avoid any interferences with existing broadcasts, we recom-
mend you to set RF channel to the OFF position.
Note
• If in step 3 the green screen does not appear, select the "AV/EXTERNAL" source on your TV
(please refer to your TV instruction manual).
1
Turn on your TV and press
?
/
1
(on/standby) to turn on the VCR.
Pull down the drop down panel.
2
Press briefly RF CHANNEL on the VCR.
The factory-preset RF (Radio Frequency) channel appears in the display
window..
3
Press PROGRAM +/- until the OFF indication appears in the display
window. The RF channel is then switched off.
The picture shown below appears clearly on the TV screen (background
must be green).
4
Press RF CHANNEL.You can now set the VCR with the Auto Set Up
function (see page 19).
g
RF CHANNEL
PROGRAM +/–
•
AUTO SET UP
RF CHANNEL
TV
STEREO
AUTO SET UP
SMH
LP
EP
SP
VIDEO
EDIT
NICAM
VPS
PDC
OPC
SMARTLINK
TRACKING
- PROGRAM +
TV
STEREO
AUTO SET UP
SMH
LP
EP
SP
VIDEO
EDIT
NICAM
VPS
PDC
OPC
SMARTLINK
SONY VIDEO CASSETTE RECORDER
AUTO SET UP
RF CHANNEL