Filter
Top Products
Getting Started
19
Setting up the VCR with the Auto Set Up function
Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function.With this function, you can set the language for the on-screen display, TV
channels, guide channels for the ShowView system, and VCR clock automatically.
Before you start ...
• Turn on the STB if it is connected to the VCR only by the aerial cable and not to the Scart
cable.
1
Hold down AUTO SET UP on the VCR for more than 3 seconds.
The VCR automatically turns on, and the country abbreviation appears in
the display window.
2
Press PROGRAM +/– to highlight the abbreviation of your country.
For some countries, there is a selection of languages to choose from.
The abbreviations of the countries and languages are as follows :
g
PROGRAM +/–
AUTO SET UP
AUTO SET UP
RF CHANNEL
TV
STEREO
AUTO SET UP
SMH
LP
EP
SP
VIDEO
EDIT
NICAM
VPS
PDC
OPC
SMARTLINK
TRACKING
- PROGRAM +
continued